What Is Basement Repair and Why Is It Necessary?

What Is Basement Repair and Why Is It Necessary?

Kitchen Cabinet Painting Naperville IL includes preventing moisture intrusion and repairing structural problems in your home’s basement. It also involves insulating the area and protecting interior walls from moisture damage.

Small cracks in basement walls, water intrusion, or a wet basement can all indicate major problems. Often, these problems are addressed by a system that consists of drain tile, French drains, and a sump pump.


Many homeowners ignore cracks in their basement walls, thinking they aren’t a serious problem or will “get better.” But these cracks allow water to seep into the basement, increasing humidity and creating an ideal environment for mold. The resulting unhealthy air will eventually enter the rest of the home.
A variety of methods can repair cracks in basement concrete. Some of these methods rehab the appearance of the cracked wall and help prevent moisture infiltration, while others improve the structural integrity of the concrete itself. In addition, some can be adapted to address underlying issues that cause the cracks.
Some cracks in basement walls are caused by hydrostatic pressure on the foundation. Water in the soil can weigh up to 60 pounds per cubic foot, which puts a lot of force on basement walls. Accumulated water can also erode the sides of basement walls, widening the crack and weakening the foundation.
One method for repairing these types of basement cracks is to use a specialized crack sealant. This is a do-it-yourself-friendly approach that can treat cracks less than an inch wide. The crack sealant is injected into the cracked basement wall through plastic injection ports. The epoxy injected into the basement cracks can help bond the concrete and block water from seeping through the wall.
Another option for treating these cracks is to use a patented crack-sealing system called FlexiSpan. This is a do-it-yourself system that can be used to treat both non-structural and structural basement cracks. The FlexiSpan system is designed to provide two lines of defense against leaking basement walls: a crack sealant and a hidden, low-profile drainage channel that directs leaking water to the sump pump. The flexible nature of FlexiSpan allows the channel to flex with the movement of the basement walls, helping to ensure that no water leaks through the cracks.
Other causes of basement cracks include differential settlement of the house’s foundation. This occurs when parts of the foundation settle at different rates, causing the concrete walls to crack as they move. Some cracks in basement walls are more serious than others, indicating the presence of an underground soil issue that needs to be addressed. Your Acculevel project advisor can recommend engineered foundation repair solutions that deal with these kinds of soil issues, helping to prevent future cracks and bowing in the basement walls.
Basements are susceptible to leaks, including the joints between the walls and footing, the sill, and the joints where new extensions are built. These joints need to be watertight to prevent further damage and water penetration. Hydraulic cement can be used to patch and fill these joints, helping to prevent future water leaks and repair existing ones.
Exterior waterproofing is a great way to stop water leaks before they even enter your home, preventing the need for interior wall repairs. This process involves excavating and exposing the foundation, then installing a waterproofing system with drain tile surrounded by rock and a filter fabric next to the footing. The water accumulating in the area is redirected to a downspout or sump pump. The area is then backfilled with native soil and tamped down. Finally, any landscaping that was moved to be done during the excavation is replaced, and the area is cleaned.
Many companies offer Band-Aid solutions for waterproofing a basement without digging up the foundation, such as waterproof paints and coatings. However, these products don’t seal the pores of concrete walls and, therefore, do not stop water from entering the basement under hydrostatic pressure.
Tar coating is a popular option, but it does not keep water out for long. It takes four to eight hours for a coat of tar to dry, and fluctuations in temperature can affect its effectiveness. It also releases toxic fumes during the application process, so it is a job best left to the professionals.
Having a waterproof basement is a critical step in protecting your home from mold and mildew, which can lead to structural problems and health issues for your family. Suppose you have noticed moisture seepage in your basement walls. We can recommend the right solution for your home and give you peace of mind that your basement will be safe from moisture for years.
Bowed and leaning walls are signs of serious basement damage that should never be ignored. They indicate that your foundation is under intense pressure from the outside. If left untreated, the bowing and leaning walls will continue to worsen and can cause severe structural damage throughout your home or commercial property.
While it’s common to have minor cracks in your basement walls from time to time, any significant bulging or buckling should be examined by a professional right away. The reason for this is that if the cracks in your basement wall are vertical, horizontal, or at a 45-degree angle, they may indicate structural damage to the wall itself or the foundation. If this is the case, you’ll need to have a concrete repair contractor look at your home or business immediately to ensure the structure is safe and secure for all occupants.
The most common cause of basement wall problems is excessive lateral pressure from the soil around your foundation, caused by poor drainage, water intrusion, and damaged waterproofing. This type of pressure is known as hydrostatic pressure and can cause your brick, block, or concrete foundation walls to shift, sink, or bow. While this can happen naturally, it’s possible to speed up the process if your basement needs well-maintained or adequate waterproofing and drainage systems installed.
In addition to the bowing and leaning walls, you may also notice that your basement stairways pull away from the wall. This is another sign of hydrostatic pressure and can be repaired with helical tieback anchors. These are installed in the ground and connected to a plate inside the wall that tightens over time, helping to straighten the walls.
In addition to helical tieback anchors, you can use carbon fiber strapping to seal and strengthen your basement walls. This is especially effective for repairing cracks in the corners of your basement and keeping them from getting any larger. This product is installed in the ground around your basement with a top bracket that ties to the joists of your foundation for an ultra-secure connection.
Floor cracks aren’t as common as wall cracks but should be inspected and repaired as part of any basement repair project. These cracks are most often caused by soil movement. This shifting of the ground under your home can cause a cracking in your floor that worsens over time.
If you have a few hairline cracks in your basement floor, these are normal and do not indicate a bigger problem. However, any cracks wider than 1/8 of an inch should be sealed to keep water, moisture, soil smells, and radon gas from seeping through the floor. Cracks that are more pronounced and extend from the perimeter of your home to the interior walls may be a sign of a foundation shift that can lead to serious problems like leaks and collapse.
Uneven concrete floors should also be looked at, and if they are sinking, you may need to do something as simple as filling the void with expanding polyurethane foam. Alternatively, a solution called PolyLevel can lift and stabilize a sinking concrete slab permanently by drilling penny-sized holes into the slab and then injecting a high-density polyurethane formula that expands under the floor to lift it.
While concrete is an incredibly strong and durable building material, it can still crack over time due to changes in the environment and soil underneath your home. Depending on their size and severity, these cracks should be fixed to prevent future damage and to maintain your home’s value. If you notice a cracking in your floor or other signs of a foundation issue, contact a reputable basement repair company to assess the situation and determine the best course of action.

Benefits of Replacement Windows

Replacement Windows

When it comes to improving your home’s look, energy efficiency, and comfort, few projects deliver as many benefits as replacement windows.Replacement Windows

You know your old windows are problematic if you struggle to open them, deal with drafts, or hear outdoor noise. New windows can resolve these problems for good. Contact Your Home Exterior Solutions for professional help.

Energy efficient replacement windows help reduce your home’s overall energy costs by insulating and regulating temperatures so you don’t have to use your heating or cooling system as often. This means lower utility bills for you and a smaller environmental carbon footprint.

With the right glass package, your new replacement windows can reduce energy consumption by up to 30%. Low emissivity coatings, insulated frames, and double- or triple-paned glass help you save by blocking unwanted heat transfer. The addition of krypton or argon gas between window panes also aids in keeping your indoor temperatures stable and reducing draftiness.

Aside from lowering your utility costs, energy-efficient replacement windows can help protect your furniture, carpets, and wallcoverings from premature fading caused by the sun’s harmful UV rays. This is especially important if you live in an area with a high UV index.

When shopping for replacement windows, look for the ENERGY STAR label and National Fenestration Rating Council (NFRC) ratings to ensure you’re getting the most efficient option. The NFRC rating measures a window’s thermal efficiency, including air and water infiltration, as well as solar heat gain and loss.

To maximize energy efficiency, look for casement and awning windows as they provide the best airflow and insulation. Swinging and sliding styles are the least efficient because they have more joints and gaps that can allow air to leak into your home. To get the most out of your new windows, consider adding a concealed shading element such as blinds or shades to further reduce your energy usage. Also, make sure your replacement windows open easily and fully so you can escape in the event of a fire.

Increased Home Value

When you’re ready to sell your Philadelphia home, new windows can be a major selling point. Potential buyers will be impressed by the energy efficiency and modern look of your home. You may even be able to increase your asking price by installing ENERGY STAR rated windows, which can save homebuyers seven to fifteen percent on energy costs.

Window replacement is one of the top ways to increase your home’s value, and although it can be a costly investment, it will give you a great return on your money. According to Remodeling Magazine’s Cost vs. Value report, homeowners can recoup 72% of their investment in replacement windows.

Another way that new windows can help boost your home’s value is by improving its curb appeal. If you have old, outdated or broken windows, they can make your home look drab and uninviting. By replacing your old windows with new, modern ones, you can instantly improve your home’s appearance and make it look more appealing to potential buyers.

In addition to boosting your home’s appearance, replacement windows can also make it safer and more secure. Old windows often have issues with functionality and may not close or open properly. New windows, however, have better locks and stronger glass that can help deter criminals from breaking into your home.

Increased Natural Light

When your windows are outdated and steamed up, they may not let any sunlight into your home. When you replace them with new windows that let in more natural light, it can make your home feel brighter and more inviting. It can also increase your property value and add a nice visual appeal to your home.

In addition, when you have more sunlight in your house, it will reduce your reliance on artificial lighting. This will save you money on energy bills over time.

A dark house can be uninviting and depressing, especially if you spend most of your time indoors working or watching TV. Filling your home with sunlight through new replacement windows can improve the mood of everyone who lives in your home. It can also help prevent Seasonal Affective Disorder (SAD).

Having windows that let in plenty of natural light is great for your health, as it will boost your vitamin D levels and cheer up your mood. It can also help improve your sleep over time by regulating your circadian rhythm.

You can choose from a variety of different window designs that will fit your home’s style. Regardless of the style you choose, it is important to go with high-quality windows that will last for years to come. This will ensure you get the most out of your investment. You can find out how durable the windows are by looking at their U-factor rating, which is a measure of the thermal efficiency of the windows. The lower the U-factor rating, the better the windows are. You can also look for windows that are made from low-maintenance materials like vinyl, wood, or fiberglass to minimize the amount of care they will need over time.

Increased Comfort

Whether your windows are old and worn out, or you’re just looking to update the look of your home, replacement windows provide many benefits. They save energy, improve comfort, protect against moisture and noise, reduce the amount of dust in your home, and increase security. Moreover, new windows can also significantly boost the resale value of your house.

When you replace your windows, you can choose a style that suits your tastes and needs. Depending on the size of your existing window opening, you can either go for a full frame replacement or use insert windows that fit into the original frame and trim. Both options are popular because they allow you to upgrade the look and functionality of your home without breaking the bank.

New windows are designed to seal air leaks, creating a consistent indoor temperature and reducing your reliance on heating and cooling systems. They also have multiple panes of glass and a layer of argon gas, which helps block the sun’s harmful UV rays. This prevents your furniture, carpeting and other interior décor from fading.

Furthermore, most replacement windows come with tilt-in features that make them easy to clean and maintain. They also offer simple operation, allowing you to escape your home in case of an emergency. This is especially important if you live near a busy road or have noisy neighbors. Many modern upscale windows also include sound-dampening features, making it easier to relax in your home and ignore outside commotion. This is a great benefit for families with small children or pets who may be bothered by loud outside noises.

Increased Value

New windows increase your home’s value and improve curb appeal by giving it a fresher look. They also make it easier to clean your home’s exterior and keep it looking beautiful without the need to climb ladders and scrub grime away. They are available in a wide variety of colors and styles to complement or coordinate with your home’s trim and siding. New windows also offer more natural light to brighten your home’s interior and reduce glare from the sun, creating a more pleasant living environment for you and your family.

Older windows can have problems like rot, water infiltration and gaps around the frame that lead to drafts. These issues can cost you money in the long run and can cause significant damage to your home’s frame, insulation, siding and other elements of the structure. New replacement windows can address these problems and prevent them from getting worse in the future.

The best window type to install depends on your home’s age and other factors. If you have an older home, full frame replacement windows are the way to go. These include a new frame with attached sashes that can replace the existing window. If your original frame is still in good condition you may choose pocket replacement windows. These are similar to full frame windows but do not have the molded fins that can be seen on the outside of the home.

Finding a project that gives you more benefits and stretches your investment dollar further than replacement windows is hard. In fact, they are ranked as one of the top home improvement projects that provide the best return on investment.

How to Handle a Bathroom Remodel

bathroom remodeling

A modern and updated bathroom can significantly increase the value of your home. It can also make it cleaner, more efficient, and aesthetically pleasing.

Consider reducing water usage with low-flow toilets and showerheads. You can also reduce energy costs with new lighting and appliances. And ADA-compliant fixtures are available for those with limited mobility. Click https://www.milwaukeebathroomremodelingpros.com/ to learn more.

bathroom remodeling

Many homeowners are eager to revamp the appearance of their bathrooms with eye-catching showers, vanities, and upscale sink fixtures. These cosmetic changes are often a do-it-yourself project. Still, professionals must handle plumbing upgrades to avoid costly mistakes leading to a flooded house and even structural damage.

To ensure your new bathroom is up to code, it’s critical to check with your local planning or building department to see what kind of permit you’ll need for your remodel. For example, changing the layout of your bathroom, moving an outlet, or replacing your water heater requires a permit and the expertise of professional plumbing contractors.

Aside from the permits, your plumber will also be responsible for removing and rerouting any existing plumbing lines affected by your renovation and installing any new fixtures you’ll add to your space. This is one of the most important steps in any remodel and will ensure your renovation runs smoothly. By carefully scheduling your plumbing services, you can save yourself the hassle of calling a plumber in an emergency.

A bathroom remodel can include changes to the electrical system, including upgrading the wiring or installing a new fixture. Adding more outlets for convenience may also be necessary, especially with the advent of smart technology and today’s need for multiple charging stations in the home.

A licensed professional should do a rewiring project in a bathroom because this room is surrounded by water and requires specialized wiring to handle the moisture. New receptacle outlets with USB ports are another popular upgrade for homeowners looking to stay up-to-date with modern technologies.

Cosmetic changes to a powder room can be more cost-effective than a high-end redesign of a large primary bath, which could require demolition and drywall installation, relocating plumbing, and installing a tankless water heater and radiant floor heating. A contractor can help you design your ideas and recommend a budget for the entire project. Establishing a realistic budget is important so you don’t pay more in interest and expenses than your home is worth.

A bathroom remodel is often a significant home improvement project that involves a wide range of services. From cosmetic changes like a new coat of paint to replacing a tub, these projects can vary in cost and complexity.

The flooring you choose is one of the most important decisions in a bathroom remodeling project, and it can affect the look and feel of your space. Many homeowners opt for tile, which is highly durable and waterproof. It also comes in various colors and patterns, allowing you to customize the aesthetic.

Wood floors are another popular option for bathrooms. Cork, in particular, is a great choice for eco-minded customers as it’s made from the bark of harvested trees that re-grow within nine years. It’s also resistant to mold, mildew, and moisture.

For those looking for a more luxurious floor, natural stone offers a premium finish to boost your home’s resale value. However, it’s typically more expensive than other flooring options. In addition, the grout lines can be prone to staining and require regular maintenance.

Bathroom lighting often needs attention, but a well-lit bathroom is essential to turning your bathroom into a spa-like retreat. From lighting fixtures to recessed and ambient lighting, new lighting can provide the ideal illumination for your daily grooming tasks while creating the right mood.

Light fixtures for a bathroom are available in many different styles and finishes to complement your space. One popular option is a flush mount ceiling light that lies flat against the ceiling and can be upgraded with a decorative fixture if desired. For recessed lighting, ensure you get a damp-rated or wet-rated light fixture that is safe for use over the bathtub or shower.

Wall sconces are another popular choice for the sides of the vanity and should have frosted or semi-opaque shades to reduce mirror, window, and eye glare. These are typically installed 80 to 85 inches from the floor. Accent lighting is also important in a bathroom remodel and can be achieved with dry-rated fixtures like pendants or sconces.

Cabinets have a major impact on your bathroom’s look and feel. Choose from unassembled versus finished cabinets, stock versus custom, and contemporary versus country options to fit your style. Opt for moisture-resistant materials like solid wood, plywood, or medium-density fiberboard (MDF). Cabinetry also comes in different grade levels with various finish and styling options.

For example, painted or stained options provide a fresh, contemporary look, while distressed and antiqued finishes lend an old-world charm. Decorative details, like raised panel doors, add sophistication and craftsmanship to your reno.

Other cabinet services include adding recessed lighting, replacing outdated medicine cabinets, and making a bathroom look brand new. Refinishing an existing vanity and installing a new mirror can bring your bathroom to the next level. These cosmetic changes cost less than a complete bathroom remodel, which could involve knocking down walls, flipping the layout, and requiring plumbing and electrical work. You may also need to install a new exhaust fan, which typically requires hiring a professional to do the electrical and venting work.

Whether it’s time to modernize your bathroom or your countertops are damaged, dated, or stained, replacement is an important part of any remodel. Your contractor can help you choose the right material to create a cohesive style and tie in your other design elements.

Laminate is a popular choice for budget-minded homeowners. It’s been through many technological advances since those Formica countertops you used in your first apartment, and today’s high-pressure laminates can accurately mimic the look of granite or marble.

Tile is a versatile countertop option that can add dramatic designs or simple elegance. It’s also fairly easy to repair if it gets chipped or cracked.

Quartz and Corian are other durable, long-lasting options that can be fabricated into custom shapes. They may cost more than natural stone, but they’re a good investment in heavy-use bathrooms or if you’re remodeling to prepare your home for sale. They’re non-porous and don’t need regular resealing like granite, making them easier to clean than other countertop materials. They’re also available in colors and textures that complement traditional, contemporary, or transitional decor.

The list regarding bathroom fixtures is long, and the options are even more diverse. Faucets come in several styles and designs, including bridges (two levers offset from each other) and centers (one central base unit faucet with handles). Showers come in various materials, from glass and fiberglass to enamel and concrete. Tubs are made of multiple materials, including acrylic and cast iron.

Choosing the right bathroom fixtures can elevate your home’s look from functional to a true luxury experience. The most important factor when selecting fixtures is determining your budget. This will help you eliminate designs that are out of your price range and narrow your choices.

Next, consider your priorities and needs. For example, do you need a vanity light to make applying makeup easier or a recessed lighting fixture to help with ventilation? Lastly, consider your preferred style. Traditional, transitional, and contemporary are popular choices for bathroom styles because they match well with most architectural home designs. However, you can also go bold and creative with your bathroom by blending styles.

The right accessories help your bathroom remodel feel complete. From storage jars and trash cans to a new shower curtain or framed mirror, the right bath décor reflects your style.

Add extra bathroom storage with built-in shelving or wall-mounted cabinets. Choose from a wide range of shelf materials, including reclaimed barn wood and metal for a rustic vibe or sleek, contemporary glass and wood shelves for a modern look. Shelves can be used to display artwork or hold toiletries and other items.

A spa-like feeling is important after a long day, and one way to achieve this is by having a place to relax in your tub. Consider adding a standalone bathtub in various styles and sizes to your remodeled bathroom. Whether you want to create a place for relaxation in your master bath or add grandeur to an en-suite guest suite, the right bathtub will pamper you. Some tubs save on water by reducing aeration to help reduce your home’s utility bills.

How to Tell If Your Home Needs an Electrician

electrician

Your Home Solutions hold up well under most conditions, but sometimes it needs to be repaired. This might be a matter of replacing a light bulb or a switch, or it could require the replacement of a whole strip of wiring or even an entire service panel.

electrician

Various power issues can pop up, from a tripped circuit breaker to flickering lights. Usually, these can be fixed with the following steps:

If your fuse board or breaker switch trips, that usually indicates an electrical problem in the house. It may seem inconvenient, but it’s important to understand why this is happening and call a professional electrician for an electrical repair as soon as possible.

Fuse switches and RCDs are designed to sense a short or unusual electrical current change and immediately cut the power. This is to prevent any harm to you or your appliances, and it means that you cannot simply reset the breaker or fuse and turn back on the lights and electrics.

A faulty appliance or an overloaded circuit can cause your breaker to trip. This is because the metal ribbon inside the fuse burns through, and all lights or sockets on the affected circuit go dead. Faulty electrical wiring can also do this, particularly old wires that have corroded over time.

To determine which of these is the cause, start by locating your fuse box and opening it. It’s typically in a utility room, porch, or garage and should be marked to indicate which circuits it controls. Once open, you’ll see a row of breakers with a switch on each one. If the switch is flipped to the Off position, the breaker has been tripped.

A good rule of thumb is to unplug all appliances on a tripped circuit, then try switching them back on again – and only if the breaker doesn’t trip immediately and stays in the on position. This will help you narrow down which appliance is causing the issue so you can call an electrician for an electrical repair to fix it.

The other possibility is that the breaker keeps tripping even with nothing plugged in. If it continues to do so after you’ve switched on appliances and reset the breaker, this is a sign of a faulty plug or wiring. You’ll need a professional electrician to replace or fix the device and its cable and to repair any damage to the wires in your house’s walls or the junction boxes.

Most homeowners will experience a dead electrical outlet at some point. It can be extremely frustrating if this happens in a room you use frequently. Fortunately, there are some things you can try before calling an electrician to solve the problem.

First, make sure your breaker or fuse hasn’t been tripped. Then, if it has been, reset it and check if your outlets or switches are working properly. If not, you’ll need to replace the fuse or breaker with an identical one.

Another possible cause of an electric outlet not working is a loose connection. You can check this by removing the outlet from its frame (only after ensuring your breaker is off) and inspecting the links of the wires. Make sure the ends of each wire are securely fastened underneath each screw. Also, look for a small black area around the screw terminals. This is a sign of a loose connection that causes excess heat, leading to eventual failure.

If you have a GFCI outlet in the room where your outlet isn’t working, try pressing its reset button. GFCIs are designed to shut off power when they detect a flow of current that could pose a danger to people or pets. They typically trip when plugged into wet or electrically charged surfaces, like a sink.

Finally, if you can’t get your outlet to work after trying these tips, it’s probably time to call an electrician. They’ll be able to diagnose and repair the problem using their training, tools, and extensive knowledge of electrical systems.

Flickering lights aren’t just annoying – they can signify a much larger electrical problem that needs expert repair. Depending on the severity of the flickering, it may be something as minor as a loose light bulb, or it could indicate a major problem that can result in power loss and even fires. Keeping an eye out for these signs and understanding what they mean can help you decide when to call an electrician for electrical services.

One of the most common reasons for flickering lights is a fluctuation or reduction in household voltage. This can be caused by several things, such as using large appliances (like refrigerators and air conditioners) simultaneously or a power outage. Abrupt changes in voltage can damage electronics and even cause an electrical fire.

Another reason for flickering lights is an overloaded circuit. If you have a lot of appliances on the same course, they’ll draw a significant amount of electricity, which can overload the system and cause the lights to flicker. To reduce this, you can try putting your appliances on different circuits, but it’s best to have an electrician check out the system and recommend the best options.

Finally, a common reason for flickering lights is damaged wiring. This can result from insulation deteriorating on old wires or even animals chewing through them. Damaged wiring can create a fire hazard as it is prone to arcing, which is dangerous for you and your family.

We look forward to helping you with all of your electrical service needs!

Over time, electrical cords, cables, wires, and flexes can become damaged. If the outer sheath is broken or worn away, the conductors inside are exposed and can easily cause an electric shock. In addition, the exposed wiring can also cause fire hazards. It is important to repair any broken wiring as soon as possible before it becomes a serious safety issue.

Electrical wiring is often hidden behind walls or in the ceiling of your home and can be difficult to access. However, even though you may not have a lot of room to work, it is still possible to repair or splice together wiring without tearing open the wall or ceiling.

First, turn off power to the circuit you are performing on by shutting down the breaker that supplies it in your home’s circuit breaker panel. Next, remove the faulty cable section, strip back the sheathing two inches on either side of the damage, and expose the copper wires inside. Ensure that all the exposed copper wires are unfused and do not touch each other; if they are, you will need to fuse them together by soldering or using a special splice connector like a lever connector.

If the cable has only been cut and not completely severed, then you can use a soldering iron to melt a piece of heat-shrink tubing onto the ends of the exposed wires to seal and insulate them. Make sure you use a quality soldering iron and don’t overheat the tip, as this could damage the wire insulation or even the metal conductors within.

If you cannot fix the wire with a soldering iron, another option is to use a lever connector, which can be purchased at most hardware stores. The splice connectors allow you to pull out a lever and insert the bare end of a wire, then close the lever to establish a strong and safe connection. If you are unsure how to fix your damaged wiring or are uncomfortable working with electricity, it is always best to leave the job to a professional electrician.

5 Reasons to Remodel Your Bathroom

bathroom remodeling

Your bathroom should be a place to relax and rejuvenate. Whether you want to repaint or overhaul the entire space, there are many ways to upgrade your bathroom to make it a more comfortable and functional room.

Before starting the project, decide which tasks you want to complete and which you want professionals to do for you. Jacksonville Bathroom Remodeling will help prevent delays due to scheduling issues.

bathroom remodeling

When bathroom renovations involve rerouting or extending water supply and drain lines, plumbers must install new pipes. Depending on the renovation goals, this may include copper or PEX piping. Copper is durable and corrosion-resistant and has a long lifespan. However, PEX is gaining popularity as it offers comparable performance at a lower cost and is easier for plumbers to work with.

Plumbing piping brings freshwater into the bathroom, connects fixtures to the supply line, and drains wastewater. The system must be properly vented and sloped to allow water flow and prevent backflow or clogging. The toilet also requires a separate supply and waste system, which must be properly connected and tilted to ensure the toilet flushes correctly.

Leaking, outdated, or corroded pipes can lead to costly leaks and damage. Resolving these issues during a remodel can save homeowners money and hassle. For example, if an old or damaged pipe bursts during a shower, it could cause water damage to rooms below the bathroom. That could cost thousands of dollars to repair.

The right piping system can make a big difference in the look and feel of a bathroom. Consider adding features such as a luxurious rainfall showerhead, mood lighting, or a sound system to enhance the ambiance and experience of the space. Smart plumbing innovations, such as Kohler’s Numi 2.0 toilet, also transform bathrooms, allowing users to set personalized preferences for water temperature, cleansing pressure, and ambiance.

During a renovation, plumbers must remove and replace existing fixtures, including bathtubs, showers, toilets, sinks, and faucets. This can be messy and time-consuming, but it’s essential to the integrity of the finished project. During demolition, the plumber should protect and mark existing pipes for their location. This will save the plumber time, money, and mess in the future. Hiring an experienced plumber for this type of work is also important. A skilled plumber can complete the job quickly and efficiently without damaging existing pipes or causing additional leaks.

Whether your bathroom space is tiny or large, maximizing the storage available is important. Even a simple bathroom remodel can provide new storage options that improve your organization and efficiency.

Adding shelves and baskets to your bathroom is an easy way to increase storage capacity. You can also add a built-in cabinet or install a freestanding cabinet to hold towels, toiletries, and other essentials. If you will install a cabinet, opt for one with glass doors so you can easily see what’s inside without opening the door.

Another way to increase storage space is to utilize empty wall space. Hanging wire baskets allow you to store anything from cotton balls and Q-tips to bars of soap and beauty products without taking up valuable counter space. This type of shelving is perfect for small bathrooms, and it can help you keep countertops free of clutter while providing easy access to frequently used items.

If you have a tub that takes up too much floor space, consider a tub-to-shower conversion. A popular choice, this upgrade can create a spacious walk-in shower that is more appealing than an outdated tub.

Replacing a bathtub with a tub-to-shower conversion costs between $250 and $500, depending on the size of the tub and your selection of materials.

Incorporating a new vanity into your bathroom can be an expensive project. Still, it’s worth the investment if you want to increase the value of your home or update your vanity for aesthetic purposes. A new sink, faucet, and countertop can make a huge difference in the look of your bathroom and elevate its functionality.

If you’re planning a bathroom remodel, start the process early. It’s best to give yourself plenty of time for completion, especially if you add an additional bath, modify the plumbing, or move walls. Procrastination can result in a more stressful project, costly surprises, and delays. By working with a trusted contractor and preparing in advance, you’ll ensure that your bathroom remodeling project stays within budget and meets your deadline.

A trip to the spa leaves you feeling relaxed and pampered, and remodeling your bathroom can help make your home feel like a relaxing escape. A great way to do this is by incorporating calming elements like greenery. You can also use decorative wall hangings and other decor items to make your bathroom more appealing.

Aesthetic improvements can include ensuring your bathroom has plenty of storage space and a place for everything. For example, if you have to pile towels on the end of the bathtub or throw linens on the floor, this can create a messy look. Installing a hand-towel ring right by the sink, hooks for bathrobes, and recessed shelving built into the walls can solve this problem and keep your bathroom clean and organized.

Another easy and cost-effective way to improve the appearance of your bathroom is to paint the walls a fresh new color. This is one of the most affordable bathroom remodeling projects, and it can make a big difference in how your space looks. When picking a color for your bathroom, it is important to remember how the room will be used and what colors will go best with your home’s overall design scheme.

If you’re doing a full bathroom renovation, consider replacing some fixtures in the room. These may include your tub/shower, toilet, or sink. Changing these items is more complicated than swapping out the fixtures in your kitchen and can involve moving these items or altering their layout significantly.

A remodel at this level could involve changing your shower door, adding a tub/shower surround, and even changing your flooring. It is important to consider these changes carefully because they can be expensive and affect how your space functions.

A renovation is less intense than a remodel and can be as simple as repainting your bathroom or swapping out the vanity. The most common renovations include cosmetic, style, and layout changes. An example of a cosmetic change would be switching from vinyl to tile floors or from a brown to white shower curtain.

One of the biggest reasons to remodel your bathroom is that it adds value to your home. It is a great way to make your property more attractive and appealing to buyers when it comes to selling. While it may not seem like the cheapest way to improve your home, it is a wise investment that will pay off in the long run.

When you decide to sell your home, a well-designed and updated bathroom can add up to 8% to the overall value of your home. This increase in value can be used to help you qualify for a higher mortgage or to purchase another property.

Having a modern and well-designed bathroom can also make you more comfortable and help reduce stress in your daily life. This is because bathrooms are often one of a home’s most heavily used areas and can often be a space where frustration and stress build-up.

When considering a bathroom remodeling project, it is important to consider the size and scope of the work and the cost of materials and labor. Many homeowners choose to rework the layout of their bathrooms as part of a remodel, which can be quite costly. However, if you are willing to stick with your current footprint, you can make many cost-effective changes that will still add value to your home.

For example, swapping out old tubs and showers for new low-flow fixtures can save you money in the long run by reducing your water bill. It is also a good idea to look into the latest technology and innovations in bathroom systems and materials that can save energy and help you become more environmentally friendly.

Upgrading flooring is another easy and inexpensive way to add value to your bathroom. Not only does it look nice, but it can help prevent water damage and make the room feel clean and fresh.

Adding a built-in fan to the bathroom is also a good idea to help with ventilation and moisture issues. This can make the bathroom feel much larger and more spacious.

Refrigerator Maintenance Tips

hvac

hvacThe back and bottom of refrigerators are hotspots for dirt, dust, and hair. This buildup interferes with heat release, leading to higher energy bills. Professionals at All Temp Air Conditioning & Refrigeration say clean coils twice yearly; unplug the fridge before you start.

Gaskets often wear out and allow warm air to enter. Use the dollar bill test to see if yours are still sealed well. Changing the refrigerator filter can keep water clean and fresh tasting. It can also remove unwanted particles that could hurt health and produce strange odors in dispensed water.

Refrigerator filters use a combination of sediment and carbon filtration to remove contaminants from your refrigerator’s tap water. The sediment filtration stage uses mechanical filtration to trap and eliminate dirt, sand, silt, rust flakes, and other suspended solid particles in the refrigerator’s water supply. Carbon filtration removes volatile organic compounds (VOCs), cyanide, chlorine, pesticides, and heavy metals from the water.

Filters need to be changed about every six months. That is because they’re clogged up with all the contaminants and particles they’ve reduced. An unchanged filter is a campground for bacteria, algae, and other living organisms that can make you sick.

As the filter becomes clogged with these organisms, it loses its ability to reduce contaminants and odors in the refrigerator’s water supply. As the contaminant levels in your refrigerator water continue to rise, you may eventually need to replace your refrigerator filter twice yearly.

Most manufacturers recommend replacing refrigerator water filters every six months. It’s important to follow the manufacturer guidelines for your specific refrigerator and its filters, as the recommended interval varies by brand. If you need the manufacturer guidelines, you should look up fridge filter replacement instructions online or in your user manual.

The condenser coils in your refrigerator house the refrigerant that cools the air inside, keeping your leftovers at a steady temperature. If the coils become clogged, the fridge has to work harder to keep things cold, and you may see higher energy bills. To avoid this, cleaning the rings should be a part of your appliance maintenance routine.

The coils are a maze of thin tubes that sit underneath or on the back of the refrigerator. They’re used to cool down and condense the refrigerant, turning it from a gas into a liquid. Over time, the coils can build up dust, pet hair, and other debris. That leads to a need for proper refrigeration, affecting how long your food lasts.

To clean the coils, unplug the refrigerator and pull it away from the wall if necessary for easier access. It’s also a good idea to wear rubber gloves and don a dust mask to avoid breathing in any gunk. If the coils are on the back of the fridge, you must remove a panel that snaps off. If they’re on the front, you should be able to access them by removing the bottom kick plate.

After you’ve removed the panel:

  1. Use a vacuum cleaner hose attachment to remove dust and debris from the coils. You can also use a brush to scrub the rings, which may help break up caked-on dirt and grime.
  2. If the waves still look dirty, spray them with a cleaning solution.
  3. After waiting a few minutes, wipe down the coils with a damp cloth to finish the job.

The refrigerator door gasket provides an airtight seal to keep cold air in and warm air out and is an important part of the fridge’s ability to maintain low temperatures. Keeping the door gasket clean and in good working condition is crucial to efficient fridge use.

Like a cracked window in an air-conditioned house, a broken refrigerator gasket will allow cold air to escape and warm air to creep in, making your fridge work harder to stay cool. That causes the refrigerator to consume more electricity and can cause foods and drinks to thaw and spoil faster.

Checking and cleaning the refrigerator door gasket is a quick and easy refrigerator maintenance task that helps prolong the life of your appliance. While visible cracks or thin, brittle sealing strips are obvious signs of an outdated gasket, smaller side tears and loosening of the adhesive bond can also indicate it’s time for a replacement.

Several different types of refrigerator door gaskets are available, and you should choose one compatible with your refrigerator model. You can find this information in your owner’s manual or by looking at the back of the refrigerator for a sticker that indicates the manufacturer and model number. You can also look inside the refrigerator or freezer compartment for a label with the same information.

Once you’ve chosen a new gasket, remove the old one by pulling it off the door. Then, clean the area where the new gasket will go with a damp cloth to ensure it’s completely clean and free of dirt and corrosive residue. Finally, fasten the new door gasket by sliding it in under the metal retainer and clips on the door frame, starting at one of the top corners and working around the door’s perimeter.

The drip pan, or water tray, is installed underneath the fridge to catch condensation that results from the refrigerator’s natural defrost cycle. Normally, this moisture drains through a hole in the back interior wall to a drain pipe on the floor that eventually evaporates. But if this drain hole becomes blocked, the refrigerator must work twice as hard to cool the food inside. If the water pan fills up too much, it can overflow, creating mold, mildew, and water damage to your kitchen floor or the basement below your fridge.

The drip pan should be emptied and cleaned regularly:

  1. Disconnect the refrigerator’s water and power supply to eliminate the risk of causing a leak or electrocuting yourself while accessing the drip pan.
  2. Carefully remove the grill that covers the front of the pan and grasp it with a hand or fork.
  3. Use antibacterial wipes or a cloth soaked in cleaning fluid to clean the drip pan and remove buildup.
  4. Empty the drip pan and clean the corresponding drain hole.

If you need help reaching the drip pan, consult your owner’s manual for directions on removing mineral deposits and cleaning the drain hole and water pan. A good-quality refrigerator drip pan will feature a model-specific design and clear instructions that allow you to reach the drain hole without disassembling it.

While at it, remember to tend to your fridge’s condenser coils. These are located at the back of or underneath the appliance and must be cleaned regularly to avoid clogs. Unplug the refrigerator, open the freezer door, and remove the access panel to reveal the coils. A crevice attachment or coil brush vacuum cleaner can then clean the coils. Once the rings are clean, close the freezer door and plug the refrigerator back in.

Refrigerators are usually the largest energy consumer in a home, and many people need to understand that proper maintenance is the key to keeping them efficient. Fortunately, a few quick and easy tasks can make a huge difference in how well your fridge performs for years to come.

First, clean the condenser coils with a vacuum cleaner’s brush attachment (or use a refrigerator coil brush if your fridge has one). These can be located behind or underneath the appliance and should be cleaned every three months or more often if you have shedding pets. Your owner’s manual can help you identify and clean the coils.

The water inlet valve is an electronically operated mechanical device that connects the household water supply to your fridge if it has a water dispenser or icemaker. Over time, this can become faulty and cause problems like water leaking from the bottom of the refrigerator or the water dispenser not dispensing any water. The good news is that replacing the water inlet valve is a fairly simple process.

Unplug the refrigerator before starting. This small step protects you from getting shocked by accidentally reconnecting the water lines while you work. Next, label the wires on the valve with masking tape so you know which ones are which when you need to remove them. Then, drag the two mounting screws holding the inlet valve and set them aside. Now, you can remove the inlet valve, slip in a new one, and reattach the wires to their correct terminals. Take a picture of the wiring with your phone to remember how to reattach them later.

Choosing the Right Paint Color

paint

paintChoosing the right paint color can feel like an overwhelming task. The right hue can instantly freshen up a room, making it more inviting and comfortable. Painters can help you pick the right one for your home.

However, many homeowners end up disappointed with their new paint job because they broke the biggest rule when selecting a paint color.

If you’re in the market for a new paint color, it’s important to understand undertones so that you don’t end up with a hue that clashes with your home’s existing finishes. Whether you’re going for a classic, neutral look or taking a design risk with something bold, knowing how to recognize the undertones of a paint color will make all the difference.

Undertones are the underlying pigments that affect how a paint color looks. They can have a huge impact, especially when paired with other colors. For example, a blue paint with green undertones might work well with white, but it might clash with pink. Identifying a paint’s undertones will help you match it with other colors easily and ensure your new color will look good in any room.

The easiest way to see a paint’s undertone is by comparing it to other colors. Start by grabbing some swatches of white paint and laying them next to each other on a blank piece of paper. That will show you the different undertones in each one – some might lean yellow or olive, while others may have a hint of purple or blue. It’s also helpful to look at the swatches with natural and artificial lighting to see how the undertones change depending on the light in your space.

You can also try laying the swatches against your furniture or other items in your room to see how they look on the walls. If you have a granite countertop or tile backsplash, it’s easy to see how the paint will coordinate with those surfaces. You can also ask the paint store to give you the paint’s formula, allowing you to see what pigments are mixed to create it.

Once you’ve identified a few potential paint colors, request samples of each to try in your home; that will give you a better idea of how it’ll look in your lighting and with your furniture and will also let you know how well it pairs with other colors in the room. Using a sample can also help you determine if the undertones of the paint are warm or cool, which will influence your design decisions.

If you want a room to feel relaxed and calm, choose warm hues that evoke comfort. In rooms that require stimulation and energization, bright, vivid colors that make you think and act quickly are ideal.

Once you have a good sense of the mood you want to create, browse for paint colors that meet your criteria. Achieving your goal can be easier than you think, especially when you know what to look for.

Rather than selecting a paint color based on those tiny chips from the home improvement center, take a sample home and test it against your furniture, curtains, and decor. The lighting in a store is different than the light in your house, so you want to be sure the shade you choose is right for your space.

Remember that mass tone is the main color your eye perceives, and undertones are the subtle hints of another color that can make or break a design. Once you learn how to recognize the undertones, narrowing down your paint options will be much easier until you find the perfect hue for your home.

Also, remember that your paint color will appear different at different times of day, depending on natural sunlight or artificial lighting. The same shade may appear yellow or green under fluorescent lighting, while it may look more blue under incandescent lights.

In addition to the types of lights in your room, consider other factors like the color and texture of your walls and ceilings. For example, if your home has a lot of wood paneling or molding, you might opt for a darker shade to make these features stand out more.

Another thing to remember is the light and sun that comes into your home throughout the day. If you have a lot of sunlight, you might opt for a lighter shade of paint to brighten your space. If you have dim lights, choose a more muted shade so the lights don’t dominate your design.

If you have furniture in your home that you want to keep or plan on re-doing your window treatments, it’s important to consider what color they will be. These colors should complement your new paint rather than clash with it. You can use a complementary color, which is the opposite on the color wheel (red and green), or an analogous hue located next to each other on the color wheel (blue and purple).

It would be best to look at your accessories, floor coverings, and any existing wall art when deciding on a color for a room. These colors will all play a role in the final product, so it’s important to consider them early on.

Lastly, it’s crucial to always sample a color before committing gallons of paint to a project. Many people skip this step, but it’s the best way to ensure you’re happy with the finished product. If you’ve ever looked at the back of a paint store, you’ll notice stacks of returned paint cans from homeowners who still need to do this step.

Once you’ve narrowed your choices, bring samples home and tape them to the wall. That is a great way to see what they will look like in your lighting, furniture, and other accents. Alternatively, some paint companies offer online tools that allow you to upload a photo of your space and try out different colors to see how they might look.

Choosing the right paint color can make your space feel fresh and new or give it a more moody and dramatic vibe. Following these tips, you can find the perfect color for your home and avoid costly mistakes!

Whether you love to stay on the pulse of home design or are hesitant to try new colors, looking at what’s currently trending in the market can help inspire you. While Pantone’s color of the year usually gets a lot of attention, it’s also important to look at other sources of inspiration. Paint companies are often the best source of color trends because they want to make their palettes appealing and attainable to consumers.

If you want to know what to look out for in 2023, consider that earthy tints are a big trend, with several of the most influential paint brands opting for shade names like “October mist” and “evergreen fog.” These warm, neutral hues embody a natural quality that can bring comfort and stability to any space. Similarly, shades of gray have become popular because they can help unify spaces with their subtle, nuanced undertones. For example, Sherwin-Williams’ Poised Taupe is a warm gray with fine yellow and blue undertones that create a soft, sophisticated feel.

In addition to warm neutrals, uplifting shades are also on the rise. Brighter yellows and tangerines can make rooms feel cozy and inviting. Meanwhile, baby pinks are seeing a more mature and sophisticated resurgence than what we typically associate with the shade.

Other shades that are a hot commodity include deep blues, which continue to rank high on the popularity chart. Blues can bring a sense of tranquility to any room, especially when combined with complementary neutrals. For instance, a navy blue and white bathroom can feel fresh and crisp with matching accessories and molding.

Purple is another vibrant shade that’s starting to gain momentum. It’s a great choice for accent walls because it can draw the eye upward and elevate any space. However, be careful when using purple in larger areas because it can overwhelm a room.

Choosing the right paint color can impact your home’s value and resale potential, so it’s important to follow these tips when selecting a color for your walls. By testing out a few different options and understanding what to look for in a good paint color, you can find the perfect hue that will serve your space well for years to come.

How to Estimate a Junk Removal Cost

junk removal cost

Junk Removal In Roanoke VA often quote based on how much space the junk will take up in their truck. Some materials, like electronic waste, require specialized handling and disposal that drives up costs.

Some junk removal services offer a guaranteed price upfront when you book by text or online. This helps them avoid surprise expenses and improve profit margins.

The size of the junk load is one of the most important factors that affects junk removal costs. Larger loads take up more space in the truck, which increases the cost of disposal. Also, larger loads may require more manpower to remove and transport. This is especially true for heavy or oversized items, such as furniture or appliances. The size of the load is also an important factor in comparing prices from different junk removal companies. Be sure to give them as much information as possible, including the amount of junk and the size of each item.

Junk removal services are a growing industry in the United States, with an estimated $10 billion worth of trash produced annually. The junk removal business is booming, thanks to the popularity of online marketplaces that allow people to connect with junk haulers and get rid of their unwanted items. Junk removal companies offer a variety of services, such as hauling and dumping unwanted materials. Some even provide additional services, such as cleaning up the site and donating usable items.

There are many factors that influence junk removal costs, including landfill and recycling fees. These charges vary by region and type of junk, so it is essential to know how much you will pay for a junk removal service before hiring someone. Also, remember to include fuel and transport costs in your estimates. These expenses can add up quickly, so it’s best to plan ahead.

If you’re planning on starting your own junk removal business, it’s important to understand how these costs impact your profit margins. The most popular pricing method is cost plus pricing, which combines direct and indirect costs to determine the price you should charge for your services. This includes the direct costs of staff, equipment, and supplies as well as overhead expenses (ongoing costs that aren’t tied to a specific job).

The cost of junk removal depends on a number of factors, including the size of the load and the complexity of the job. For example, large amounts of electronics may require special handling and disposal procedures that can increase the cost of the service. Some items may be too hazardous to dispose of in landfills, so they must be taken to specialized recycling or waste treatment centers.

Distance to the disposal site

When estimating junk removal costs, the distance to the disposal site is an important factor. The farther the company has to travel, the higher the price will be. This is due to the cost of fuel and labor. Additionally, the type of item being removed may influence the price. For example, a large piece of furniture might require special handling, which increases the price. In addition, items that are deemed hazardous waste must be handled by a professional recycling company and will often come with an extra fee.

The size of the load will also affect the junk removal cost. Some companies charge per pound, while others charge by truckload or dumpster. In either case, it is important to know the exact weight of your load before determining the total cost. This will help you avoid overpaying or underpaying for junk removal services.

A good junk removal company will provide detailed pricing options, including volume-based rates, flat rate pricing, and per-item pricing. The latter is often more affordable and helps you manage your budget more effectively. Some junk removal companies even offer discounts for larger jobs and repeat customers.

Some junk removal companies prioritize environmental sustainability by offering recycling services. This can save you money in the long run. In addition, recycling can reduce your trash volume and increase the value of your property. However, it is important to remember that some items are too toxic for recycling, such as aerosol cans and lead-based paint.

Another thing to keep in mind is the number of hours it will take for a company to complete the job. This is because employees will have to focus on junk removal instead of their primary functions, which will result in lower productivity and a higher cost. Therefore, it is recommended to hire a junk removal service with a high customer satisfaction rating and great reviews.

Junk removal companies usually base their prices on the amount of junk they haul and whether they have to take it to a specific location. They may also have additional fees for hazardous waste, such as refrigerants, batteries, and latex or lead-based paints. These additional charges can add up quickly, making the total junk removal cost much higher than you might expect. In order to get an accurate quote, contact the junk removal company directly and request a free estimate.

Permit fees

Junk can quickly pile up in a house and make it difficult to live in. A junk removal company can help homeowners get rid of unwanted items and regain control over their homes. The cost of junk removal varies depending on several factors, including the size and quantity of the waste and the distance between the home and the disposal site. Some companies also charge a fee for disposing of hazardous materials.

Labor costs can also increase the price of junk removal services. This includes hourly rates for employees and the number of hours needed to complete the job. It is important to consider these factors when calculating your junk removal prices, and you should regularly reassess them. You should also factor in overhead expenses, such as insurance and payroll taxes, which can add up quickly.

Other factors that influence the junk removal cost include landfill fees and tipping fees. Some types of waste, such as electronics and construction debris, require special handling or disposal methods. These fees can add up, and they may also be passed on to the customer. Junk removal companies often pay these fees when they drop off waste at a disposal facility, but they can also be charged for renting a dumpster on public property.

When calculating your junk removal prices, you should always include a markup to cover your overhead and other expenses. This will ensure that you make a profit on each sale and remain competitive in your market. If you are unsure of how to calculate your markup, you can look at your competition’s pricing or contact other junk removal businesses for quotes.

The most common way to market your junk removal business is through word of mouth. Referrals from friends and family are a great way to attract customers, but you can also advertise through social media. Creating a Facebook page or Twitter profile for your junk removal business is an effective way to attract new customers. You can also invest in vehicle decals, which can make your trucks and trailers look professional and act as a mobile billboard.

Gas prices

Junk removal is a service that involves removing bulky, electronics, appliances, chemicals, and yard waste that cannot be placed in your weekly trash bins. This type of junk usually has higher disposal fees and may require special handling. Some items, like old tires and paint cans, may even be hazardous. Junk removal services can help you get rid of these items safely and at a reasonable price.

The junk hauling industry is a large and growing business. It is important to keep up with best practices and industry trends to ensure your company stays competitive. You also need to consider labor costs when calculating your pricing. The average wage for a field service worker is $25 per hour, and you should add 20% to this amount for employee-related expenses. In addition, you should look at your competitors’ prices to make sure yours are in line with the market rate.

When determining the cost of junk removal, you must take into account several factors, including size and weight. The size of the load will determine how much time and labor is required to move it. The weight of the junk will impact the overall cost, as well as the distance to the disposal site. In addition, there are a number of additional expenses that may be associated with junk removal, such as dump fees and permits.

Many junk removal companies price their services on a volume basis, which is calculated by dividing the total volume of the junk by the truck’s capacity. This method is most common for residential jobs and is a good option for businesses with a smaller fleet of trucks. This method is more accurate than using a truckload-based system, which can lead to inaccurate estimates.

The most common method for pricing junk removal is the volume-based model, which includes a flat fee for each job plus fuel, disposal and recycling costs. This is a great option for businesses with limited space and is relatively easy to implement. However, this method is not always the best for high-volume junk removal businesses, as it can increase the risk of underestimating the time needed to complete a job. Using a job tracking software, such as Jobber, can help you avoid these problems by providing real-time estimates.